Kelepona: 0086 15369260707
Huahana hae-21

huahana

Pale Uea & Sleevings

Hoʻokomo ʻia ka moʻo hoʻomalu uea i nā mea like ʻole Tapes, Cable Protection Grommets, Cable Sleeving, Cable Protection Tubes, Flexible Conduits, a me Cable Protection Accessories.Kūlike nā mea pale Typhoenix a ʻoi aku ma mua o nā kūlana maʻamau o kēia manawa.Hana ʻia lākou āpau e nā mea hana kiʻekiʻe a loaʻa i nā hoʻokolohua koʻikoʻi ma mua o ka lawe ʻana.Hāʻawi lākou i ka pale uwea maikaʻi loa ʻaʻole wale no ka ʻoihana uea uea automotive akā no ka ʻenekinia mechanical a me nā mea kanu, nā kaʻaahi a me nā hale aupuni.Hiki i nā ʻano o nā huahana pale uea mai ke kiʻekiʻe kiʻekiʻe Plastic, Fabric a me Rubber hiki ke hāʻawi iā ʻoe i nā hopena hoʻokahi no kāu ʻōnaehana pale kelepona.Loaʻa ka lawelawe OEM a me ODM.
  • Lepe

    Lepe

    ʻO ka lipine adhesive ka hana o ka puʻupuʻu, ka pale ʻana, ke kūpaʻa wela, ka insulation, ka pale ahi, ka hoʻohaʻahaʻa ʻana i ka walaʻau, ka kaha ʻana, a me nā mea ʻē aʻe i loko o ke kaula uea kaʻa, a ma kahi o 30% o ka mea hoʻopili uea.ʻO kā mākou mau huahana hoʻopaʻa uea i hoʻohana ʻia i ka PVC lipine maʻamau, ka lipine lole, ka lipine fleece, ka lipine pepa a me ka lipine foam (Sponge Tape), etc. ʻO ka pale wela he 80 ℃, 90 ℃, 105 ℃, 125 ℃ a i ʻole 150 ℃.
    ninaukikoʻī
  • Kaʻa Grommet

    Kaʻa Grommet

    Hoʻohana pinepine ʻia nā grommets kaʻa i nā puka kaʻa no ka hoʻopaʻa ʻana, insulation, dustproof a me ka wai.Hiki iā mākou ke hāʻawi i nā ʻano like ʻole a me nā nui o nā grommets uea kaʻa i hana ʻia me ka EPDM Rubber wale nō a i ʻole ka hui pū ʻana o ka lāʻau a me ka plastic a me nā mea metala.Loaʻa iā mākou kā mākou hui loea, no laila hiki iā mākou ke hāʻawi i nā lawelawe OEM a me ODM.
    ninaukikoʻī
  • Paipu hoʻopaʻapaʻa

    Paipu hoʻopaʻapaʻa

    Ua ʻike ʻia ka paipu corrugated ʻo ia ʻo wire loom tubing.ʻO nā paipu corrugated maikaʻi ke kū'ē i ka abrasion, ka pale ahi a me ka pale wela.Hāʻawi mākou i nā paipu corrugated o nā mea like ʻole e like me PP, PA6, PPmod, TPE, etc. ʻO ka pale wela o nā paipu corrugated ma waena o -40-175 ℃.Hoʻolako ʻia kā mākou bellows e ke kaʻa
    ninaukikoʻī
  • PVC & PE Sleeving

    PVC & PE Sleeving

    ʻO ka PVC a me ka PE sleeving loaʻa nā waiwai uila a me ke kino maikaʻi, ke kūpaʻa waika a me ka pale ʻana i ka corrosion.Hoʻokō ka mea pale ahi i ka maʻamau o UL224, VW-1 a me J QAF-mar, a ʻo ka pale o ke kaiapuni e hoʻokō i nā koi o RoHS, REACH a me SONY i nā kūlana palekana kaiapuni.ʻO ka pale wela maʻamau he 105 ℃ a me 125 ℃, a ʻeleʻele ke kala.Hiki iā mākou ke hāʻawi i ka lawelawe maʻamau no ke anawaena o loko a me waho, ke kala, ka mānoanoa o ka paia a me ka pale wela.
    ninaukikoʻī
  • Paipu Hoʻoemi Wela

    Paipu Hoʻoemi Wela

    Heat shrinking Tubing loaʻa i ka lapalapa ahi-retardant maikaʻi loa, insulating waiwai, palupalu a elastic, haʻahaʻa shrinkage wela, wikiwiki shrinkage, a hiki ke hoʻohana nui ʻia i ka hoʻopili uea, ka hoʻopau ʻana i ka uea, ka pale ʻana i ka hui ʻana, ka ʻike ʻana i ka uea, ka pale insulation, ka pale ʻana i ka corrosion, etc. Hoʻokō kā mākou huahana i ka pale ahi a me nā koi o ka mālama ʻana i ke kaiapuni, a ua hana ʻia nā ʻano hoʻokolohua hōʻike hana e like me nā kūlana UL224 a me ASTM.Hiki i kekahi mau huahana ke pani i ka TE (Raychem), Sumitomo, DSG-Canusa, Alpha, 3M a me nā huahana LG.
    ninaukikoʻī
  • Paipu Uila Fiberglass

    Paipu Uila Fiberglass

    ʻO Fiberglass Tubing, ʻike ʻia hoʻi ʻo nā paipu fiberglass, a i ʻole nā ​​lima fiberglass, he ʻano kūikawā o nā lima lima fiber i hana ʻia me ke aniani aniani i ulana ʻia i loko o kahi ʻano tubular a hana ʻia e kahi kaʻina hana hoʻonohonoho wela.Hoʻokaʻawale ʻia nā paipu fiberglass i nā paipu fiberglass resin silicone a me nā paipu fiberglass rubber silicone.ʻO ke aniani fiber tube ka maikaʻi o ka hoʻokuʻu ʻana, ka lapalapa ahi a me ka palupalu, a hoʻohana nui ʻia ʻaʻole i ka pale insulation wale nō o nā kaʻa kaʻa H&N akā ʻo nā mea pono hale, nā mea hoʻomehana uila, nā kukui kūikawā, nā televise a me nā mea uila.
    ninaukikoʻī
  • Līkina lima

    Līkina lima

    Hoʻomaopopo ʻia nā lima lima i hoʻopaʻa ʻia ʻo ia i nā lima uʻi i hoʻopaʻa ʻia, nā kaula uila, a me nā mea ʻē aʻe. Ua māhele ʻia nā mea i PET, PE, PA66, a me nā mea ʻē aʻe, me nā hiʻohiʻona like ʻole o ka māhele, pani ʻana a me ka ʻōwili ponoʻī, a ʻo ka maʻamau kūʻokoʻa maʻamau he 125 ℃. a me 150 ℃.Ma waho aʻe o ka hoʻohaʻahaʻa ʻana i ka walaʻau, ʻoi aku ka maikaʻi o ka abrasion a me ka pale wela o ka sleeving braided.Ua hōʻoia ʻia nā lima lima uwila i hāʻawi ʻia e Typhoenix e UL, SGS, ROSH a me IATF16949:2016.No nā pono hoʻoponopono, e ʻoluʻolu e kelepona mai iā mākou.
    ninaukikoʻī
  • Pale Uea ʻē aʻe

    Pale Uea ʻē aʻe

    Hiki iā ʻoe ke loaʻa nā huahana pale uea ʻē aʻe lohe.
    ninaukikoʻī
ʻO ke kāʻei ʻana o waho a me ke koho ʻana i ka pale Uea    

1. Ka pale ʻana o waho o ka ʻenekini hoʻopaʻa uwea

 Hoʻokomo ʻia ka ʻenekini uila i loko o ka pahu mīkini, kiʻekiʻe ka mahana, nui ka haʻalulu, a paʻakikī ke ʻano hana, no laila ua wahī ʻia me:
1.1 Na Paipu Poni ʻO nā paipu i hoʻopaʻa ʻia me ka pale ahi kiʻekiʻe, ke kūpaʻa ʻana i ka corrosion a me ka ikaika mechanical kiʻekiʻe, e like me PA, PPMOD corrugated pipes.  1.2 PVC lipine Hoʻohana ʻia ʻo PVC Tape ma ka ʻaoʻao.Hiki ke hoʻopili pihaʻia e hāʻawi i ka sila piha.ʻO ka mea maʻamau, pono ia i ka PVC Tape me ke kūpaʻa wela kiʻekiʻe o 105 ℃ a i ʻole 125 ℃.  1.3 Paipu lole a me nā paipu PVC Hiki ke hoʻohana ʻia ka lipine lole polyester kiʻekiʻe, a hiki ke hoʻohana ʻia kekahi mau lālā me nā paipu PVC kūpaʻa kiʻekiʻe e noʻonoʻo ana i ke kuhikuhi ʻana o ka lewa. hjgf

2. Ka pale ʻana o waho o ke keʻena kaʻahelekaula uwea

 He ʻilihune nō hoʻi ka nohona hana ma ʻaneʻi.E holo ana ke kaula uwea mai ka aoao o ka huila mua hema me ke kaa mua a hiki i ka aoao o ka huila mua akau, oi loa aku i ka ua a me ka hau a me na alanui ino, i hoopilikia loa ia e ke kaiapuni.ʻO ka hapa nui o nā lālā e koho i nā mea e hoʻopili ai i nā kaula me ka ikaika kūpaʻa a me ka ikaika mechanical, e like me: 
2.1 ʻO PP a me PA nā Paipu ʻAi  2.2 Paipu PVC Hoʻopili ʻia kekahi mau lālā me nā paipu PVC ma muli o ke kuʻi ʻana o nā uwea a me ka hoʻonohonoho ʻana o ke kino o ke kaʻa, e like me ka ABS wheel speed sensors a me nā lālā ʻē aʻe.   2.3 Lepe lole Hoʻohana ʻia kahi ʻāpana o ke kaula uea nui e hoʻopili ana i ka lipine me ke kūpaʻa maikaʻi a me ke kūpaʻa wela kiʻekiʻe.   2.4 Kaʻa Grommets Pono e pale ʻia ka wahi hoʻololi o ke kāʻei uwea mai ka hale mua ma o ka puka metala a hiki i ke kaʻa e pale ʻia e nā grommets kaʻa e pale aku ai i ka ʻohi ʻana a i ʻole abrasion o ke kaula uwea mai ka puka metala, a he hopena wai maikaʻi nā grommets kaʻa. , ka pale ʻana i ka wai ua mai ke kahe ʻana i loko o ke kaʻa me ke kaula uwea. hdfh
   

3. Ka pale ʻana o waho o ka mea kani uwaʻa

 Hoʻopaʻa ʻia ka mea hoʻopaʻa uea ma lalo o ka pā mea hana, no laila liʻiliʻi ka wahi hana.Ma muli o ka nui o nā mea kani a me nā hana hoʻomalu ma ʻaneʻi, ua hoʻoholo ʻia he nui nā lālā o ka mea kani uila, a ʻoi aku ka paʻakikī o ke kaula uwila holoʻokoʻa.Eia naʻe, maikaʻi ke kaiapuni ma ʻaneʻi.No laila, 
3.1 Kapepa PVC Hiki ke hoʻohana ʻia ka lipine PVC no ka hoʻopili piha ʻana a i ʻole ke kāʻei liʻiliʻi.    3.2 Paipu PVC Pono e uhi ʻia kekahi mau lālā me nā paipu PVC, e like me nā pedal accelerator, nā lālā airbag, etc.  3.3 Lipine Sponge ʻO ka lālā o ke kaula uea i hoʻopili ʻia i ka hana leo, ua wahī ʻia me ka lipine sponge, nona ka hopena haʻalulu maikaʻi a hōʻoia i ka lawe ʻana i ka hōʻailona maikaʻi.  3.4 Kape uwea hulu hipa hoʻohana ʻia kekahi mau ʻāpana no ke kumu o ka hoʻohaʻahaʻa ʻana i ka leo, a koi ʻia ka lipine wili wili.   hfgd

4. Outer wrapping pale o ka puka uwea hao

 Hoʻokomo ʻia kēia kaula uea i nā puka 4. ʻOiai he liʻiliʻi ka wahi, ua pale ʻia e kahi papa o loko.Hiki ke hoʻopili piha ʻia a hoʻopaʻa liʻiliʻi ʻia me ka lipine, a hiki ke hoʻopili ʻia kekahi mau lālā me nā pepa plastik ʻoihana a i ʻole nā ​​paipu PVC.Pono e pale ʻia ka wahi hoʻololi o ke kaula uwea mai ka puka metala 4-puka a i loko o nā ʻāpana wili me ka paʻakikī maikaʻi loa. jhg (2)   

5. Ka pale ʻana o waho o ka chassis a me ke kaula uwea hale

 

E hoʻokomo ʻia ka hapa nui o nā mea hao nui ma kēia mau wahi ʻelua i loko o nā puka metala kino kaula uwea or kiʻi kino, A loaʻa i ka pale o loko, no laila maikaʻi ke kaiapuni hana. Hiki ke hoʻopili pololei ʻia kēia mau harnesses me ka lipine, palupalu a maʻalahi hoʻi e hoʻokomo.Wahi a ke kuhikuhi lālā kikoʻī a me ke ʻano o ka hoʻoponopono ʻana, hiki ke hoʻopili piha ʻia ka lālā a i ʻole i kāʻei ʻia me ka lipine a i ʻole ʻia mewili lima limaa i ʻole mālama ʻia ePaipu PVC;ina sʻO nā ʻāpana ʻē aʻe e kuʻi i ke kino o ke kaʻa ma muli o ka haʻalulu, hiki ke hoʻohana ʻia ka paipu PVC no ka pale.

  jghfj

6. Ka pale ʻana o waho o ke kāʻei uwila ʻana

 He pōkole kēia ʻauamo uea a pili i ka pākaukau.Hoʻopili pinepine ʻia ia me ka paipu corrugated, a ua uhi piha ʻia ka lipine PVC waho.		 11

7. Ka pale ʻana o waho o ka ʻeke uwea ʻauʻau

 ʻO ke kāʻei uila airbag kahi ʻāpana koʻikoʻi o ke kāʻei uila kaʻa, a ʻo kāna hana a me kāna hana ʻana he mea nui loa. ʻO ka pale o waho o ke kaula uwila ma ke ʻano he paipu melemele melemele, ka paipu PVC melemele a ua wahī ʻia me ka lipine melemele, e hana ana i kahi ʻōlelo aʻo maikaʻi.

juufuyt

8. Ka pale ʻana i waho o ke kaula uwea lālā

No ka maʻalahi o ka hui ʻana, pono e hoʻopili ʻia kekahi mau lālā o ka uea masking tape (pepa pepa) i ka mua;pono e hoʻopili ʻia kekahi mau ʻāpana koʻikoʻi nā ʻūhā no ka pale ʻana i ka hui ʻana a me ka pōʻino i ka wā o ka lawe ʻana, a hoʻopili ʻia me ka masking tape.He hiki ke hoʻohana maikaʻi ʻia ka masking tape, a hiki i ka mea hana hui ke wehe koke i ka lipine.  jgfhui
 Typhoenix hāʻawi i nā ʻōnaehana pale uwea ma luna aʻe me nā ʻano kikoʻī like ʻole e kūpono i nā ʻano o nā ʻano pono o nā uea kaʻa.Inā makemake ʻoe i nā ʻike ʻē aʻe, e ʻoluʻolu e kāhea iā mā˚ou.

Waiho i kāu leka