Mohala: 0086 15369260707
Banner ea lihlahisoa-21

sehlahisoa

Tšireletso ea Cable & Sleevings

Letoto la ts'ireletso ea lithapo le kenyelletsa lisebelisoa tse fapaneng Litheipi, Li-Grommets tsa Tšireletso ea Cable, Sleeving ea Cable, Li-Cable Protection Tubes, Flexible Conduits, le Lisebelisoa tsa Tšireletso ea Cable.Lisebelisoa tsa ts'ireletso ea Typhoenix li kopana le ho feta litekanyetso tsohle tsa hona joale le tse tloaelehileng.Kaofela ha tsona li hlahisoa ke bahlahisi ba phahameng 'me li fumana liteko tse thata pele li pepa.Li fana ka tšireletso e ntle ka ho fetisisa ea lithapo eseng bakeng sa indasteri ea likhoele tsa likoloi feela empa le bakeng sa boenjiniere ba mechini le ba limela, literene le meaho ea sechaba.Mefuta e sa tšoaneng ea lihlahisoa tsa tšireletso ea cable e tloha ho Plastiki, Lesela le Rubber ea boleng bo phahameng li ka u fa tharollo e le 'ngoe bakeng sa lisebelisoa tsa hau tsa tšireletso ea cable.OEM le ODM tšebeletso ea fumaneha.
  • Theipi

    Theipi

    Theipi ea sekhomaretsi e bapala karolo ea ho kopanya, ho hanyetsa, ho hanyetsa mocheso, ho kenya letsoho, ho thibela lelakabe, ho fokotsa lerata, ho tšoaea, joalo-joalo ka har'a marapo a terata ea likoloi, 'me ka kakaretso e nka karolo ea 30% ea lisebelisoa tsa ho phuthela ka terata.Lihlahisoa tsa rona tsa theipi tsa terata li kenyelletsa teipi e sebelisoang ka tloaelo ea PVC, tepi ea lesela, tepi ea boea, tepi ea pampiri le tepi ea foam (Seponche Tape), joalo-joalo Theipi ea mocheso ke 80 ℃, 90 ℃, 105 ℃, 125 ℃ kapa 150 ℃.
    patlisisodintlha
  • Grommet ea koloi

    Grommet ea koloi

    Hangata li-grommets tsa likoloi li sebelisoa mamating a likoloi bakeng sa ho tiisa, ho pata, ho thibela lerōle le ho thibela metsi.Re ka fana ka libopeho tse fapaneng le boholo ba li-grommets tsa terata ea likoloi tse entsoeng ka EPDM Rubber feela kapa lebasetere la rabara le thepa ea polasetiki kapa ea tšepe.Re na le sehlopha sa rona sa litsebi, kahoo re ka fana ka litšebeletso tsa OEM le ODM.
    patlisisodintlha
  • Convoluted Tubing

    Convoluted Tubing

    Corrugated tubing e boetse e tsejoa e le wire loom tubing.Li-tubing tse senyehileng li na le khanyetso e ntle ea abrasion, ho hanyetsa lelakabe le ho hanyetsa mocheso.Re fana ka liphaephe tsa masenke tsa lisebelisoa tse fapaneng tse kang PP, PA6, PPmod, TPE, joalo-joalo Ho hanyetsa mocheso oa liphaephe tse nang le makotikoti ho pakeng tsa -40-175 ℃.Mehala ea rona kaofela e fanoa ka koloi
    patlisisodintlha
  • PVC & PE Sleeving

    PVC & PE Sleeving

    Sleeving ea PVC le PE li na le thepa e ntle ea motlakase le ea 'mele, ho hanyetsa acid le ho hanyetsa kutu.Sehlahisoa sa malakabe se kopana le maemo a UL224, VW-1 le J QAF-mar, 'me tšireletso ea tikoloho e finyella litlhoko tsa litekanyetso tsa RoHS, REACH le SONY tsa tšireletso ea tikoloho.Mocheso o tloaelehileng oa ho hanyetsa ke 105 ℃ le 125 ℃, 'me 'mala ka kakaretso ke o motšo.Re ka fana ka tšebeletso e tloaelehileng bakeng sa bophara ba ka hare le ka ntle, 'mala, botenya ba lerako le ho hanyetsa mocheso.
    patlisisodintlha
  • Mocheso Shrinking Tubing

    Mocheso Shrinking Tubing

    Mocheso o fokotsehileng Tubing o na le thepa e thibelang malakabe, e thibelang malakabe, e thibelang malakabe, e bonolo ebile e le elastic, mocheso o tlase oa shrinkage, shrinkage e potlakileng, 'me e ka sebelisoa haholo ho hokahanya ha terata, kalafo ea ho qetela ea terata, ts'ireletso e kopaneng ea solder, boitsebahatso ba terata, ts'ireletso ea insulation, ts'ireletso ea kutu, joalo-joalo. Lihlahisoa tsa rona li kopana le litlhoko tsa ho thibela mollo le litlhokahalo tsa ts'ireletso ea tikoloho, 'me mekhoa ea tlhahlobo ea index ea ts'ebetso e etsoa ho latela maemo a UL224 le ASTM.Lihlahisoa tse ling li ka nka sebaka sa TE (Raychem), Sumitomo, DSG-Canusa, Alpha, 3M le lihlahisoa tsa LG.
    patlisisodintlha
  • Fiberglass Tubing

    Fiberglass Tubing

    Fiberglass Tubing, eo hape e tsejoang e le li-tubes tsa fiberglass, kapa li-sleeve tsa fiberglass, ke mefuta e ikhethileng ea matsoho a faeba a entsoeng ka faeba ea khalase e lohiloeng ka sebopeho sa tubular mme e sebetsoa ka mokhoa o phahameng oa mocheso.Li-tubes tsa fiberglass li arotsoe ka li-tubes tsa silicone resin fiberglass le li-tubes tsa silicone rabara fiberglass.Glass fiber tube e na le mokelikeli o motle, ho lieha ha lelakabe le bonolo, 'me ha e sebelisoe haholo ho sireletsa li-motor tsa H&N grade empa hape le lisebelisoa tsa ntlo, lisebelisoa tsa ho futhumatsa motlakase, mabone a khethehileng, lithelevishene le lisebelisoa tsa elektronike.
    patlisisodintlha
  • Sleeve e Lohiloeng

    Sleeve e Lohiloeng

    Li-sleeve tsa li-braided li boetse li tsejoa e le li-sleeve tsa cable tse lohiloeng, lisebelisoa tsa sleeving, joalo-joalo. Lisebelisoa li arotsoe ka PET, PE, PA66, joalo-joalo, ka ponahalo e fapaneng ea ho petsoha, ho koala le ho itšeha, 'me maemo a ho hanyetsa mocheso ka kakaretso ke 125 ℃. le 150 ℃.Ntle le ho fokotsa lerata, lesela le lohiloeng le na le abrasion e ntle haholo le ho hanyetsa mocheso.Li-sleeve tsa li-wiring tse fanoeng ke Typhoenix kaofela li tiisitsoe ke UL, SGS, ROSH le IATF16949:2016.Bakeng sa litlhoko leha e le life tsa ho iketsetsa, ka kopo ikopanye le rona.
    patlisisodintlha
  • Tšireletso e 'ngoe ea Cable

    Tšireletso e 'ngoe ea Cable

    U ka fumana lisebelisoa tse ling tsa ts'ireletso ea lithapo li utloa.
    patlisisodintlha
Koloi ea Wire Harness Outrapping le Khetho ea Tšireletso ea Cable    

1. Tšireletso ea ho phuthela ka ntle ea lithapo tsa lithapo tsa enjene

 Mochine oa ho roala enjene o kenngoa ka kamoreng ea enjene, mocheso o phahame, ho sisinyeha ho hoholo, 'me sebaka sa ho sebetsa se thata, kahoo se phuthetsoe ka:
1.1 Lipeipi tse Senyehileng Liphaephe tse entsoeng ka makote tse nang le lelakabe le phahameng la mollo, ho hanyetsa kutu le matla a phahameng a mochine, joalo ka liphaephe tsa PA, PPMOD.  1.2 Theipi ea PVC Theipi ea PVC e sebelisoa ka periphery.E ka phutheloa ka botlalo ho fana ka tiiso e feletseng.Hangata, e hloka PVC Tape e nang le mocheso o phahameng oa ho hanyetsa oa 105 ℃ kapa 125 ℃.  1.3 Theipi ea Lesela le liphaephe tsa PVC Theipi ea lesela la polyester e sebetsang hantle haholo e ka sebelisoa, 'me makala a mang a ka boela a sebelisoa ka liphaephe tsa PVC tse hananang le mocheso o phahameng ho nahanoa ka tsela e kobehang ea sebaka. hjgf

2. Tšireletso e koahelang ka ntle ea phaposi ea baetikhoele ea likhoele

 Tikoloho ea mosebetsi mona le eona e batla e fokola.Mehala ea likhoele e matha ho tloha karolong e ka holimo ea lebili le ka pele le letšehali hammoho le foreimi e ka pele ho ea karolong e ka holimo ea lebili le ka pele le letona, haholo-holo nakong ea lipula le lehloa le litsela tse mpe, tse anngoeng haholo ke tikoloho.Makala a mangata a boetse a khetha thepa ea ho phuthela ka thapo e nang le matla a matle a manganga le a mochini, joalo ka: 
2.1 PP le PA Liphaephe tsa Corrugated  2.2 Pipe ea PVC Makala a mang a phuthetsoe ka liphaephe tsa PVC ka lebaka la ho kobeha ha mehala le sebopeho sa 'mele oa koloi, joalo ka lisensara tsa lebelo la ABS le makala a mang.   2.3 Theipi ea Lesela Karolo e 'ngoe ea lisebelisoa tse ka sehloohong tsa terata e sebelisoa ho phuthela ka lesela le nang le khanyetso e ntle ea ho roala le ho hanyetsa mocheso o phahameng.   2.4 Li-Grommets tsa Koloi Sebaka sa phetoho ea marang-rang ho tloha ka kamoreng e ka pele ho ea ka lesoba la tšepe ho ea ho cab se hloka ho sireletsoa ke li-grommets tsa koloi ho qoba ho phunya kapa ho phunyeha ha mohala o tsoang ka lesoba la tšepe, 'me li-grommets tsa koloi li na le phello e ntle ea ho thibela metsi. , ho thibela metsi a pula hore a se ke a phalla ka har'a teraka hammoho le marapo a likhoele. hdfh
   

3. Tšireletso ea ho phuthela ka ntle ea lisebelisoa tsa ho roala lisebelisoa

 Sesebelisoa sa lisebelisoa tsa lisebelisoa se tsitsitsoe tlas'a sesebelisoa sa lisebelisoa, kahoo sebaka sa ho sebetsa se senyenyane.Hobane ho na le lithapo tse ngata tsa lithapo le mesebetsi ea taolo mona, ho lekoa hore ho na le makala a mangata a likhoele tsa lithapo, 'me mohala oa likhoele o batla o kopane ka kakaretso.Leha ho le joalo, tikoloho ea mona e batla e le ntle.Kahoo, 
3.1 Theipi ea PVC Theipi ea PVC e ka sebelisoa bakeng sa ho phuthela ka botlalo kapa ho phuthela hanyenyane.    3.2 Pipe ea PVC Makala a mang a hloka ho phutheloa ka liphaephe tsa PVC, tse kang li-accelerator pedals, makala a airbag, joalo-joalo.  3.3 Theipi ea Seponche Lekala la terata e hoketsoeng tšebetsong ea molumo hangata le phuthetsoe ka theipi ea seponche, e nang le phello e ntle ea ho monya le ho netefatsa phetiso e ntle ea mats'oao.  3.4 Theipi ea Fleece Wire Harness likarolo tse ling li sebelisoa molemong oa ho fokotsa lerata, 'me ho hlokahala teipi ea terata ea boea.   hfgd

4. Tšireletso ea ho phuthela ka ntle ea marapo a terata ea monyako

 Sesebelisoa sena sa terata se kenngoa menyakong ea 4. Le hoja sebaka se le senyenyane, se sirelelitsoe ke phanele ea ka hare.E ka phutheloa ka ho feletseng kapa e phuthetsoe ka mokhoa o fokolang ka theipi, 'me makala a mang a ka phutheloa ka pampiri ea polasetiki ea indasteri kapa liphaephe tsa PVC.Sebaka sa phetoho ea marang-rang a marang-rang ho tloha lesobeng la tšepe la menyako ea 4 ho ea ka hare le eona e hloka ho sireletsoa ke likarolo tsa rabara tse thata ka ho fetisisa. jhg (2)   

5. Tšireletso ea ho phuthela ka ntle ea chassis le marapo a marulelo a marulelo

 

Boholo ba lithapo tse ka sehloohong libakeng tsena tse peli li tla kenngoa ka 'mele likoti tsa tšepe tse nang le maqhama a cable or dikotwana tsa mmele, 'me li be le tšireletso ea liphanele tsa ka hare, kahoo tikoloho ea ho sebetsa e ntle.Lithapo tsena li ka phutheloa ka ho toba ka tepi, li bonolo ebile li bonolo ho li kenya.Ho ea ka tataiso e tobileng ea lekala le mokhoa oa ho lokisa, lekala le ka phutheloa ka ho feletseng kapa le phuthetsoe ka mokhoa o fokolang ka theipi kapa le phuthetsoe kaseaparo se lohiloengkapa e sirelelitsoeng kePipe ea PVC;haeba slikarolo tse ling li itlotsa khahlanong le 'mele oa koloi ka lebaka la ho sisinyeha, pipe ea PVC e ka boela ea sebelisoa bakeng sa tšireletso.

  jghfj

6. Tšireletso ea ka ntle ea ho phuthela ea Battery wiring harness

 Mohala ona oa terata hangata o mokhuts'oane 'me o hokahane le betri.Hangata e phuthetsoe ka tube ea sekoti, 'me tepi ea ka ntle ea PVC e phuthetsoe ka ho feletseng.Li-terminals tsa betri tsa li-electrode tse ntle le tse mpe ka kakaretso li hloka ho sireletsoa ka sekoahelo sa rabara se se nang lerōle.		 11

7. Tšireletso ea ka ntle ea ho phuthela ea airbag wiring harness

 Lithapo tsa li-airbag ke karolo ea bohlokoa ea lithapo tsa koloi, 'me tlhahiso le ts'ebetso ea eona li bohlokoa haholo. Tšireletso e ka ntle ea lithapo tsa likhoele ka kakaretso e hloka ho ba phala e tšehla ea masenke, peipi e tšehla ea PVC 'me e phuthetsoe ka teipi e mosehla, e bapalang karolo e ntle ea temoso.

juufuyt

8. Tšireletso ea ho phuthela ka ntle ea marapo a marang-rang a lekala

Bakeng sa ho kopanya, makala a mang a likhoele a hloka ho kopanngoa le tsona theipi ea masking (theipi ea pampiri) pele ho nako;likarolo tse ling tsa bohlokoa li lokela ho phutheloa ka liphahlo tsa foam ho thibela ho thulana le ho senya nakong ea lipalangoang, le ho tlamisoa ka masking tape.Theipi ea masking e na le moaparo o motle, 'me mosebeletsi oa kopano a ka khaola tepi habonolo le kapele.  jgfhui
 Typhoenix e fana ka litharollo tsohle tse kaholimo tsa ts'ireletso ea lithapo tse nang le litlhaloso tse fapaneng tse fapaneng ho lumellana le mefuta eohle ea litlhoko tsa likhoele tsa makoloi.Haeba u hloka lintlha tse ling, ikutloe u lokolohile ho iteanye le rona.

Tlohela Molaetsa wa Hao